Audio Technica AT8015 Shotgun Microphone

Purchase & earn 106 points!R5,299.00

Line + Gradient Condenser Microphone, 460mm

  • Designed for video production and broadcast (ENG/EFP) audio acquisition
  • Provides the narrow acceptance angle desirable for long-distance sound pick
  • Excellent sound rejection from the sides and rear of mic
  • Switchable low-frequency roll-off
  • Operates on battery or phantom power
  • Deliver with stand clamp, windscreen, battery and protective carrying case

Out of stock

Description

Audio Technica AT8015 Shotgun Microphone

Very accurate sound capture, even in noisy environments

Designed for video production and broadcast (ENG/EFP) audio acquisition, the AT8015 provides the narrow acceptance angle desirable for long-distance sound pickup, along with excellent sound rejection from the sides and rear of mic. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations.

Generally, the tube interference of this type of microphone can be extended to reduce the acceptance angle and thus increase the sound capture distance. Shorter condenser microphones do not have as long-a range as long as the shotgun models, but are favoured for their greater acceptance angle in some cases, when the accuracy of the source is less important.

  • Long 460mm shotgun microphone, designed for video production and broadcast (ENG/EFP) audio acquisition
  • Provides the narrow acceptance angle desirable for long-distance sound pickup
  • Captures sound with high intelligibility in noisy environments due to excellent sound rejection from the sides and rear of mic
  • Operates on battery or phantom power for increased versatility
  • Switchable 80Hz low frequency rolloff, with a slope of 18dB / octave to reduce pickup of low-frequency ambient noise
  • Effective protection against interference related to nearby mobile phones and other unwanted radio frequency
  • Comes with a windscreen, a 1.5V AA battery, a stand clamp and a carry case

Technical Info

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Line + gradient
Frequency Response 40-20,000 Hz
Open Circuit Sensitivity Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: -39 dB (11.2 mV) re 1V at 1 Pa
Impedance Phantom: 250 ohms Battery: 300 ohms
Maximum Input Sound Level Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 dB/octave
Switches Flat, roll-off
Dynamic Range Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 72 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Battery Type 1.5V AA/UM3
Battery Current/Life 0.4 mA / 1200 hours typical (alkaline)
Weight 195 g (6.9 oz)
Dimensions 460.0 mm (18.11″) long, 21.0 mm (0.83″) diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; AT8135 windscreen; battery; protective carrying case

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)

× WhatsApp